Hello Warriors,

大家嚎，

There is a tiny bit of information that was missing:

除了裝甲改動之外還有一些沒有寫出的信息：

– Speed Limit was buffed to 38 / 12 ( 28 / 12 previous).

極速從之前的28/12Buff到了38/12

And lets remember what was posted a couple days ago:

還有前些日子說過的這些：

– Hull MG weakspot disappeared.

車身上的機槍孔弱點消失了

– LFP is now 50° instead of 45°, plus the very top part of the LFP is 150mm thick.

首下現在是50°厚了，而不是45°，而且首下最上邊的那一塊現在是150mm厚

– Extra sloped parts on the UFP for the driver and radioman periscopes are less wide, though the driver one now gives you a tiny sport sloped at 75°.

首上的駕駛員和通訊兵的潛望鏡的更加傾斜的部分現在比以前窄了，盡管駕駛員的那個潛望鏡現在有了一小塊傾斜75°的區域

– Hull floor near the front is 40mm now instead of a solid 25mm.

靠近前方的車身底盤現在是40mm厚了，而不是以前的25mm

– Superstructure rear is 10° instead of 5°.

戰斗室后方的傾斜角度是10°，而不是以前的5°

– Spare tracks cover a few areas on both sides of the superstructure, though dunno how thick they’re supposed to be since they’re 270mm thick now.

備用履帶會覆蓋戰斗室側面的一些區域，但是現在不清楚這些區域應該是多厚，因為現在模型上的厚度是270mm

– Bump on the superstructure front is now pretty much all 150mm thick instead of half being 80mm.

戰斗室正面凸出來的那一塊基本都是150mm了，而不是像以前一樣有一半是80mm

– Superstructure front is now at 15° instead of 11°.

戰斗室正面的角度是15°了，而不是11°

– Mantlet is 250mm-210mm thick instead of 240-150mm, meaning you still won’t be penned there.

炮盾的厚度現在是250~210mm，而不是以前的240~150mm厚。反正還是打不穿就是了

– Superstructure roof is 45mm instead of 40mm now.

戰斗室的頂上現在是45mm厚了，而不是40mm

3D Model

視覺模型

ARMOR MODEL

裝甲模型

(the back and top are not shown as there are no armor changes)

(由于沒有改動所以就不放背后和正上方的圖片了)